We suggest adjusting the position of the sensor to follow a curved path, as this can help prevent frequent breaks.
The initial step involves carefully cutting the pipe along the approximate path indicated by the red line I have marked in the picture.
Before securing the sensor, please test if the curve suits your sensor model.
To swap the sensor, please remove the screws and reposition them according to the following instructions: The screw indicated by the arrow should be placed at the corresponding red point on the right. You should now be able to generate a curve successfully. You can ensure the sensor with one screw while you find the right possition. Later, you will need to create a new hole for the second screw, and ensure to cover the original hole with an additional screw.
After you have installed the sensor, we kindly ask you to share a video demonstrating the opening and closing of the valve. This will help us ensure that there are no kinks or strains in the cable.