Switch type gas W1A

\uD83E\uDD14 Probleem

For conversion type gas it is necessary to replace the burner bed according to the type of gas and follow the instructions for adjusting the gas valve.

You can purchase the burner bed using the following link:

W1 Series Burner – Giesen Coffee Roasters

See below the attached file with instructions;

Please disregard the following sentence at the end of point 3.3: The lowload is always 1 mBar!

Lowload for the W1A is 0.8 mBar.

The gas valve setting must be adjusted by a gas technician.

Once you have purchased the burner bed, please remember to request a new sticker to replace it on the back door of the roaster.

 Gerelateerde artikelen