W6/w15 Series

Installation & adjustments

• Adjust the drum W6/W15 series
• How to adjust gas valve W6/15A
• How to set the parameters on the V20 Sinamics W6/W15 A/E
• How to remove Error 23 (10U1/102U1/104U1/104U1) from a regulator W6A
• How to change the Sinamics V20 W6A
• Adjust the stirrer W6A
• How to adjust the low load on the gas valve W6A
• Switch type gas W6A.
• Chimney recomendations W6A

See less ▼

Maintenance

• Adjust the stirrer W6E
• Sound in the drum W6E
• Software with cleaning mode W6A
• Cleaning guide for maintenance W6A
• How to remove and clean the burner bed W6A

Common Problems

• The flame turns yellow W6A
• Leakage of smoke through the cooling tray or exhaust pipes W6A
• Drum/Roasting fan/Cooling fan inverter W6
• Thermal overload alarm W6A
• Air speed shows 0 Pa W6A
• Emergency stop alarm W6A
• The stirrer get stuck W6
• Burner failure W6A
• Under pressure low W6A
• HMI touch screen frozen W6A
• Air speed shows 500 Pa W6A
• The LED does not light W6A
• Sound in the drum W6A
• Fan speed to high W6A
• Burner does not light, but not "burner failure" W6A
• Inverter alarm A503 W6E
• The stirrer get stuck W6E
• HMI touch screen frozen W6E
• Under pressure low W6E
• The machine automatically reduces the burner output W6E
• Air speed shows 500 Pa W6E
• How to remove "Error 23" 10U1/102U1/104U1 W6E
• Tripping circuit breaker W6E
• GCC failure W6 Pro
• Burner Failure W6pro
• The stirrer get stuck W6pro
• Replace a double read out PT100 W6A
• Burner failure W15A

See less ▼

Replacements

• Replace a PT100 on the W6E
• How to replace the gearbox of the drum motor W6A
• Replace a bean/air PT100 on the W6A
• Change reducer gears of a W6
• Change reducer gears of a W6/W15

Software

• How to connect Cropster W6E
• How to change your computer IP address W6A
• How to connect Cropster W6A

Legacy (Moeller)

• Emergency stop alarm in a Moeller
• Replacing the drum motor in a Moeller
• Adjust a Moeller gas valve